I had to replace my steering rack and now I'm putting my front end back together. I'm hoping that some of you guys with service manuals could help me out. I'm looking for the torque specs for any/all of the following nuts/bolts:
Steering rack to sub-frame
Sub-frame to chassis bolt (the long one that passes through the control arm bushing)
Sub-frame to chassis nut
Control arm bolt (passes through front bushing)
Ball joint nut
Tie rod nut
Swaybar end link nuts
Sub-frame to stabilizer-brace bolts (there are two of them on each side of the leading edge of the sub-frame)
Stabilizer brace to chassis bolts (leading edge of stabilizer, bolts in behind bumper support beam)
Steering pump bolts
Steering rack to sub-frame
Sub-frame to chassis bolt (the long one that passes through the control arm bushing)
Sub-frame to chassis nut
Control arm bolt (passes through front bushing)
Ball joint nut
Tie rod nut
Swaybar end link nuts
Sub-frame to stabilizer-brace bolts (there are two of them on each side of the leading edge of the sub-frame)
Stabilizer brace to chassis bolts (leading edge of stabilizer, bolts in behind bumper support beam)
Steering pump bolts