Ford Transit USA Forum banner

Torque specs for 250 Differential Cover bolts

12K views 1 reply 1 participant last post by  JoeMannix 
#1 ·
Hi, gonna pull the diff cover if I get new one today.
All I need is that and the specs on how much to torque the cover bolts.
It is a 3:31 NO Limited slip.
Thanks. Joe
 
Discussion starter · #2 ·
So I called my service guy and he looked it up.
Torque specs on 2015 , 250, Sterling non-limited slip 9.75 differential cover bolts.....33 ft pounds!
Pulled the cover, very slight wear on inside about 3/8 inch x by about an 1" long and a 1/8 inch deep groove from ring gear on cover.
Gear looks unscathed.
My guestion is what about the filings from the cover, they are fine and some in there, but do I need to rinse them out or something ?
Just wipe them off?
Anyway I got a tube of MotorCraft silicone, it says to let it put it together wet, where As RTV, has you go though stages of drying, then assembling.
Things looking good!
Thanks everyone
Joe Mannix
 
  • Like
Reactions: ultane
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top