I turned off the passenger side airbag
Then I removed the passenger seat to install a custom platform in it's place
There was one two wire connector under the seat that I dis-connected
I assumed it is some sort of sensor that senses if someone is sitting in the seat?
The wire went into the lumbar region of the seat which confused me further
I used a mutimeter to see if the two pins on the seat side connector had resistance
I get a reading under 1 ohm
I was trying to determine if it was a switch at the other end of the wire or some sort of sensor
So now the airbag light stays lit up all the time (see my image)
Searching for free wiring diagrams has yielded nothing
I did find a site where you can get a paper copy for $82
http://www.helminc.com/helm/Result....5&Category=3&Keyword=&Module=&selected_media=
Can anyone shed some light on how that passenger seat two pin connector works?
I am trying to fool it into thinking the seat is still there and get the airbag light to shut off
