Hello, I recently purchased a transit bench seat to install in my cargo van but I need the brackets / rails to bolt into the floor. Wanted to check here before ordering them on ebay - thanks!
Thanks for info! It was the last row seat in a ford transit passenger van - so it's a bench seat and two single seats (each single seat only has one leg so I believe they must be installed in rear with the bench? So we're just going to use the bench seat on its own and resell the single seats).Depends on which seat you are installing. If it is a single or 2 passenger seat, then you can use the slimmer 2 dot RED brackets. For the 3 passenger seat, you need one that has the heavier mounting support like the BLUE or ORANGE ones. The picture of the 3 dot BLUE bracket is a cut version of the actual 2 seat back to back bracket.
Okay thank you 👍 I want to be safe but also tight on money - is it best to just go with these transit ones on ebay? Or would it be okay to search for something else that's cheaper? This seat will be for my baby so obviously not going to cut corners if it compromises safety.The 2 dot GREEN brackets are what is used for your 31" 2 passenger rear mounted seat. You can use this one as it has the bolt in front of the front mount and one on the each side of the rear mount for a more secure mounting. Any others would work when mounting in a cargo van.