Maybe someone will reference some official numbers... but I wouldn't hesitate to put a couple hundred pounds on those points - given adequate anchoring. Those points - near the wall - are super solid.
Hanging bed using cross members?
We're a family of 4 with a SWB MR van and exploring options for a second bed. We already have a benchseat that converts to a bed for a lower bunk, and were planning on building an upper fixed platform bed above it. The problem with that one is the limited headroom between the beds with a med roof and feeling a little claustrophobic. SO, we're also looking at floating cot/bed options (prob for the kids but on occasion a 100-160lb adult). Something we can put up and take down easily, be pretty comfortable and lightweight as possible.
The big question is: Can the ceiling cross members support that kind of weight, and if so, how much? Attached pics with the hammock and red circles is where we're thinking of securing the corners of the hanging supports. (Other pic included for concept reference)
![]()
![]()
![]()
The big question is: Can the ceiling cross members support that kind of weight, and if so, how much? Attached pics with the hammock and red circles is where we're thinking of securing the corners of the hanging supports. (Other pic included for concept reference)
1 - 6 of 6 Posts
You tawkin' 'bout me.
Per BEMM - roof rack mounting points
"Load not to exceed 79.3kg (175lbs) at individual attachment points for local durability • Load not to exceed 190kg (420lbs) total for roof structure durability"
I knew /someone/ would find it. Glad to see my faith in those mount points isn't TOO far off Ford's official stance. 😁You tawkin' 'bout me.
Per BEMM - roof rack mounting points
"Load not to exceed 79.3kg (175lbs) at individual attachment points for local durability • Load not to exceed 190kg (420lbs) total for roof structure durability"
I good to know! Thanks for the official specs, we just might give it a go!You tawkin' 'bout me.
Per BEMM - roof rack mounting points
"Load not to exceed 79.3kg (175lbs) at individual attachment points for local durability • Load not to exceed 190kg (420lbs) total for roof structure durability"
1 - 6 of 6 Posts
