Ford Transit USA Forum banner

Glueing Plastic with VHB /HB and otheres-

5K views 14 replies 8 participants last post by  orton 
You can purchase polycarbonate sheets (Macrolux is one brand name) that can be glued. 8 mm but limited colors. White, clear or bronze.

Recent price from Tap Plastics for 8mm sheets was clear 4' x 8' for $77.95 and white for $84.95

They also have 10',12' and 16' lengths.

I did test gluing a piece of plywood to the polycarbonate with polyurethane construction adhesive. Worked fine.

Polycarbonate would be a tougher surface to damage.
 
I will buy white Macrolux for the ceiling. No painting.

Was also going to use it on the walls but will use 1/8" plywood with a gasket made out of 1/8" closed cell foam. A small amount of insulation value but it should prevent squeaks. Will also use 1/4-20 plastic screws so no condensation on the screw heads.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top