Ford Transit USA Forum banner

First real mod to my new transit.

3084 Views 9 Replies 6 Participants Last post by  EL34xyz
I am sure I am not the only one to have been a little anxious over this move. I do think it may well have been therapeutic! Once I drilled the first 1/8" location hole, the worry turned to work.


See less See more
1 - 1 of 10 Posts
yep, that's the very first mod I did to my van also

People asking about what tools to use?
I used a 24tpi blade in a jigsaw
It's a metal cutting blade and it cut like butter
Blue painters tape to draw the line on
Drill some 3/8 inch diameter holes in the corners

The roof steel is not very thick
I kept my knees on some carpet and on top of the cross beams for support and it was no problem being on the roof
Wear some knee pads to cushion your knees


See less See more
1 - 1 of 10 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.