Ford Transit USA Forum banner

Fantastic Fan, noise and installation

10265 Views 17 Replies 11 Participants Last post by  khilbrec
Hey y'all! I've been camper-converting a T-250, LWB extended high roof for a hot minute now and I'm getting close to done... got solar, wood floors, bed platform, insulation done... might document the build here sometime if people think it would be good information?

Anyway, one of my final tasks is to install a roof vent. I bought a Fantastic Vent and I have a couple of questions before I go sawing into my roof. One is that I hear some people complain about wind noise while driving... can anybody with experience discuss this issue with me? I'm pretty sensitive to driving noises and have worked tirelessly to hunt down squeaks and rattles. If after all of this my fan hollers 24/7 that is going to bum me out big time.

The second is, looks like they recommend flat mounting surfaces for this thing and the Transit roof is very conspicuously convex. Anybody have any issues with installation because of this? I had planned on doing the install with sheet metal screws and putty tape, maybe a wood frame on the underside for the screws to bite into.

Thanks in advance for any comments!
1 - 1 of 18 Posts
One thing from previous threads as I recall is to avoid having it near the very front of the roof -- better if its at least a bit farther back to avoid wind noise.
1 - 1 of 18 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.