Ford Transit USA Forum banner
1 - 16 of 16 Posts

· Registered
Joined
·
2,926 Posts
Discussion Starter · #1 · (Edited)
I had this exterior emblem designed last year and the vendor would only do a minimum of 250 pieces. They just came back to me in the last week and said they would do the 150 pieces I had asked for.

Anyone interested in one of these emblems for their Transit? It would fit on any Transit where you may have made your own 'CrewVan Edition' by adding a 2 or 3 passenger seat behind the front passenger area. It would also work for the upcoming 'CrewVan package' that will be a part of the 2020 Transit body styles.

On the most recent setup, they changed the hitch cover to just the 'TRANSIT' logo but if I get enough interest, I can get the one in the second picture with the same "CrewVan Edition' logo.

Pricing on the CrewVan emblem would be $30 plus shipping and the hitch cover in the first picture would be $35; second one would be $38.
 

Attachments

· Registered
Joined
·
2,243 Posts
Send a PM to this member name if interested in the above emblem or hitch covers.

CVM,

You should trademark it and then license it to Ford so they can use it. (or have them compensate you with a new vehicle every few years in exchange ) :D

Semper Fi
 
  • Like
Reactions: gggGary

· Registered
Joined
·
3,180 Posts
Here is the final design for the CrewVan emblem. We will have one available for Transit owners who have made their own CrewVan package that will use BLACK lettering and the 2020 models from Matt Ford will have the RED lettering as shown in the pictures above
 

· Registered
Joined
·
3,180 Posts
The CrewVan emblem has been ordered and we will have BOTH emblems right before the first 2020 Ford Transit CrewVan is delivered to Matt Ford.

The CrewVan emblem with the BLACK logo will be available for $30 and they will be separately boxed for shipping. Will place order information once they arrive at the dealership.
 

· Registered
Joined
·
3,180 Posts
We should have the CrewVan Edition emblems a few weeks before the actual vans will be arriving at Matt Ford. As stated above, we will be offering a few special emblems for forum members who made their own CrewVan Edition so we would like for them to have this emblem as they are part of the reason Ford finally decided to build one for 2020.

I will start taking request NOW for forum members who want one of the CrewVan Edition emblems with the BLACK center logo. Only 50 of these were ordered so once they are gone, we are not looking to order any more of this type of emblem.

In your email, use the heading 'CrewVan Emblem' and just send your name, address, and email and we will be contacting you once they arrive. Send your email to [email protected].
 

· Registered
Joined
·
3,180 Posts
They are finally off the engineering design area and ready for the first production pieces. They took new pictures. I requested separate pictures so we now have separate pictures, one for each emblem.We will be using the one with the RED lettering on the Matt Ford CrewVan Edition and the other one with Black lettering well be available for anyone who has made their own crewvan with adding a 2 or 3 passenger seat to signify they have one.

We are looking to place it on the van in a similar position to the XLT lettering on the Transit passenger van similar to the picture in post #1 .
 

Attachments

· Registered
Joined
·
3,180 Posts
Loaded the new images for the CrewVan Edition emblems. The Black lettered version will be available for Transit owners who made their own version of the crewvan with adding a 2 or 3 passenger seat in their cargo van. Possible placement will be centered in the area where the current XLT emblem is located on the Transit passenger van but you may place it anywhere you wish.
 

· Registered
Joined
·
8,006 Posts
The parts guy at Halvorson Ford called me about a box they had with these emblems in it. This was a special deal I had working with Matt Ford about doing a special model for the CrewVan. They want to sell these emblems so offering them at $10 each. I placed one on my 2020 CrewVan once it arrived at the dealership. They were designed to be the same size as the XLT emblem on the passenger van and I made a cardboard template to mount them in the same position on the CrewVan.
 
1 - 16 of 16 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top