Ford Transit USA Forum banner

Cabinets -Build In Flex?

6157 Views 11 Replies 8 Participants Last post by  JP4
Building cabinets and shelving -

wood --

Is there need to build in Flex or some Slop ?
so that when van flexes cabinets have some give-

Dont want squeeks or wood/ sheet metal messing up

Using Rivet Nuts/ Bolts to mount to interior sheet metal -

also did you glue wood joints ??
1 - 1 of 12 Posts
My 80/20 cabinets are rigidly attached to the floor/walls and roof ribs. Did the same in the Sprinter build and did not have any problem with either.

http://www.ortontransit.info/cabinets.php
1 - 1 of 12 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top