I put my switch here:
Blue Ox Bypass Switch For Cargo Lights
I know some of you have installed the Blue Ox Bypass switch to control the interior lights of the Transit.
After you connected the Blue Ox to fuse panel ( Fuse # 32??), exactly where did you mount the ON/OFF Switch. On the removable panel to access the fuses? Or somewhere else on the dash board? What kind and size of drill bit was used for the mounting hole?
Appreciate your help!!
After you connected the Blue Ox to fuse panel ( Fuse # 32??), exactly where did you mount the ON/OFF Switch. On the removable panel to access the fuses? Or somewhere else on the dash board? What kind and size of drill bit was used for the mounting hole?
Appreciate your help!!
1 - 2 of 27 Posts
Easier, quicker, won't have a possible warranty issue from messing with the wiring. Can remove the BlueOx and all is normal again except for a hole in the dash. Put a sticker or placard over it and nobody will know.So whats the advantage of a fuse switch over just installing some inline switches?
1 - 2 of 27 Posts
- This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Ford Transit USA Forum
A forum community dedicated to Ford Transit owners and enthusiasts. Come join the discussion about performance, modifications, troubleshooting, storage capacity, maintenance, and more!
Full Forum Listing
Recommended Communities
