[dray2009]

Having trouble finding 3M-90 in Canada for my thinsulate installation. Are there some other alternatives?

I can get 3M 77. Will that work?

 

[Bez]

Don't know if you have Harbor Freight over there but I recently discovered their spray adhesive sprays and sticks much better than 3M-90. They're cheaper too. The 3M-90 spray can I bought was either defective or by design, did not spray well no matter how hard I shook it or cleaned the nozzle. It only sprayed a small stream of adhesive and not a confetti stream like it's supposed to. I used 3M 77 since then, until I discovered the Harbor Freight product. I read that 3M 77 does not fare well in weather condition.

https://www.harborfreight.com/24-oz-industrial-adhesive-spray-93792.html

 

[Damaskinos_of_Athens]

.
I used magnets.
.

 

[GROOVY2]

used Gliden Gripper to glue thinsulate in place-( walls)

worked well - just brush metal with Gripper and
press thinsulate in place -
can be repositioned for a few minutes - easy

did used 3m #90 over cab roof -
with headliner Lowered positioned thinsulate on top
and Sprayed #90 between Between headliner and roof-
worked well-

 

[sarracenia]

.
I used magnets.
.

I realize this is an old thread but what kind of magnets did you use for attaching, and how did it hold up over time?