General Information
Year
2016
Make
Ford
Model
T250
Color
White
History
Purchased 11/19/16
2016 Ford T250 (White)
Modifications
Interior
This is a work van primarily, but my job allows me to carry a few toys while I travel - bicycles, enduro bike, fishing gear etc.
My goal is to build it out so that I can add a 3 person bench with a partition/bulkhead behind that bench. That way I am only heating/cooling half the cubic space. The space behind the partition will be used for work storage, two bikes, and a dirt bike. I'm trying to keep the potential messes contained.
Sound deadening material added. Noico 80mil.
Temporary Motorcycle mount fabricated. When I build the partition, I will integrate a permanent moto mount into that.
E-Track installed for mounting points for gear and shelving.
The partition is built I started with 1" 14 gauge steel. Welded together a frame and then finished it with carpet covered 1/4" plywood. it is mounted in 3 places on each wall brace and 4 places on the floor. A motorcycle wheel chock is integrated.
Next are the mounts for two bicycles in the back area.
My goal is to build it out so that I can add a 3 person bench with a partition/bulkhead behind that bench. That way I am only heating/cooling half the cubic space. The space behind the partition will be used for work storage, two bikes, and a dirt bike. I'm trying to keep the potential messes contained.
Sound deadening material added. Noico 80mil.
Temporary Motorcycle mount fabricated. When I build the partition, I will integrate a permanent moto mount into that.
E-Track installed for mounting points for gear and shelving.
The partition is built I started with 1" 14 gauge steel. Welded together a frame and then finished it with carpet covered 1/4" plywood. it is mounted in 3 places on each wall brace and 4 places on the floor. A motorcycle wheel chock is integrated.
Next are the mounts for two bicycles in the back area.
Exterior
Steel Horse Front End Guard