Ford Transit USA Forum banner

1/2 in. Non-Metallic Water Tight Push-to-Connect Elbow Connector

$5 USD
0.00 star(s) 0 ratings — Ford Transit USA Forum
The 1/2 in. Tectite by Apollo Non-Metallic Water Tight Push-to-Connect Elbow Connector is the fastest, simplest and cleanest way to connect flexible non-metallic conduit without the use of tools or glue. Simply insert the conduit to allow the high-strength stainless steel teeth to grip the pipe securely against the specialty designed O-ring. Fitting removal and reuse is just as simple. Pull the collar back against the fitting and remove the conduit with a twisting motion. After assembly, fittings may be rotated for simpler installation in tight spaces. All Tectite Electrical by Apollo fittings are UL listed and watertight. Fast, clean and simple installation using Push-To-Connect technology Includes nut and integrated EPDM seal Requires no solvents or tools for installation or removal Removable and reusable Corrosion-proof for longevity UL listed Pipe insertion depths can be found on packaging Constructed with durable PPSU (polyphenylsulfone) plastic California residents

Forum Comments

I used one of these after cutting off the big end. The hole is sealed with butyl tape/caulk. [link] It's visible in the lower right, beneath the roof rack. Photo taken before installing the solar cables. [link]
Decided to go with two Ecoworthy 130W flexible panels sitting on polycarbonate [link] The panels are glued to the polycarbonate and the polycarbonate is glued to the roof along each edge and the front edge. Butyl tape provides fairing with holes at the 4 corners for drainage and breathing of the polycarbonate channels. ... more

Forum Reviews

There are no reviews.

Write a Review

Do you have experience with this item? Help our community members and share your knowledge.

Leave a review by signing in.