Wire molding redo cargo - Ford Transit USA Forum
 1Likes
  • 1 Post By orton
 
Thread Tools
post #1 of 3 (permalink) Old 03-23-2016, 10:36:PM Thread Starter
Junior Member
 
Join Date: Mar 2016
Posts: 1
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Wire molding redo cargo

I have a high roof cargo with the wire molding ran right where my shelves will bolt. Has anyone rerouted that before? Is there a plug behind the Styrofoam block? I am not happy with that cheap wire molding and would like to run it in the wall.
ckcargo is offline  
Sponsored Links
Advertisement
 
post #2 of 3 (permalink) Old 03-27-2016, 12:59:AM
Member
 
Join Date: Dec 2014
Posts: 38
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 10 Post(s)
I'm about to do the same rerouting. There is not a plug behind the styrofoam, the forward two rows of led lights do have connectors inside the moulding.....haven't opened the rear moulding yet, working on a folding bed and wall paneling as I work front to back. I hope the rear leds and tail lights have connectors.
SR75 is offline  
post #3 of 3 (permalink) Old 03-27-2016, 10:12:AM
Senior Member
 
Join Date: Jan 2014
Location: Occidental, Ca.
Posts: 2,750
Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 980 Post(s)
I removed the Ford wire covers from the left side wall and across back of van above the rear doors. Needed to move the side wall wiring up to get inside the upper rear cabinets. Not enough slack in wiring loom that goes down back rear corner to the left side tail light. Was able to reroute one wire to a sensor, change the wiring on the ground plate and reroute the wiring inside the door frame to add wire length. Did not cut any wires.

Replaced the stock wireway with 1 1/2" square Panduit channel with a snap on/off cover on side wall. Built a box to cover the wiring above the rear door windows. Relocated one of the stock LED lights to the bottom of the box with a switch and wired it to the house battery.
Frednic likes this.

2015 high roof 148" WB 3.5 Ecoboost 3.31 LS rear cargo.
orton is online now  
Reply

User Tag List

Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page



  Similar Threads
Thread Thread Starter Forum Replies Last Post
Wire pass through The 3Rs Electronics, Audio, and Lighting 2 03-23-2016 11:58:AM
Hard wire a dash cam Mechanical Pencil Electronics, Audio, and Lighting 1 03-20-2016 11:56:PM
Upfitter Switches- How and where to wire? lepelch Camper Vans and Conversions 16 01-10-2016 09:46:PM
12 Volt Wire- connectors rjack Electronics, Audio, and Lighting 5 07-28-2015 02:02:PM
Bird on a Wire.... rondrond Introductions 6 12-03-2014 11:03:PM

Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off